آقا مشکل از فعال بودن dnd بود غیر فعالش کردم درست شد به همین سادگی
*79
-
مدل کارت قبلی که روش بود اوپن واکس a400p بود که با اون هم همین مشکلو داشتیمنوشته شده توسط Backtrack مشاهده پستآخرین ویرایش توسط yari67; در تاریخ/ساعت 01-05-2014, 02:29 PM.یک نظر بدهید:
-
هر دو داخلی تو اپراتور پنل فعال هستند حتی همین 1007 در حال مکالمه است(از سمت خودش مشکلی نیست)نوشته شده توسط Backtrack مشاهده پست
کامند رو هم زدم می گه فعاله
1007/1007 D N A 1024 OK (380 ms)
مدل کارت هم اینه Digium AEX800
البته کارت اوپن واکس هم داریم و که قبلا روش بود که بخاطر تعداد پورتهای کمکش عوض کردم رو اونم همین مشکل بود
ممنون از راهنمایی و پاسخ سریعتونآخرین ویرایش توسط yari67; در تاریخ/ساعت 01-05-2014, 02:29 PM.یک نظر بدهید:
-
سلام
این لاگها میگه که داخلی 1007 available نیست
ببین یعنی از یه داخلی دیگه هم که به 1007 زنگ میزنی اشغاله؟
برو تو operating panel ببین وضعیت داخلی چه طوریه؟
از منوی tool هم کامند sip show peers بزنید ببینید وضعیت داخلی چه طوریه؟
کارتتون چیه؟ احیانا openvox نیست؟
استریسک رو ریستارت کنی مشکل موقتا حل میشه؟کد PHP:Called SIP/1007 [Jan 5 0800] VERBOSE[3080] chan_sip.c: -- Got SIP response 480 "Temporarily not available"
back from 109.224.55.134:1024 [Jan 5 0800] VERBOSE[12615] app_dial.c: -- SIP/1007-000000bd is circuit-busy
آخرین ویرایش توسط masome vahid; در تاریخ/ساعت 01-05-2014, 02:07 PM.یک نظر بدهید:
-
نه مشکل با روشن خاموش کردن حل نشدنوشته شده توسط Mohammad مشاهده پست
به دو تا از داخلی ها که اینطور بودند زنگ زدم و این لاگ ها انداخته(به شماره های 1007 و 1400)
کد:[Jan 5 08:57:48] VERBOSE[11939] app_macro.c: == Spawn extension (macro-exten-vm, s-CHANUNAVAIL, 4) exited non-zero on 'DAHDI/2-1' in macro 'exten-vm' [Jan 5 08:57:48] VERBOSE[11939] pbx.c: == Spawn extension (from-did-direct, 1400, 1) exited non-zero on 'DAHDI/2-1' [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [h@from-did-direct:1] Macro("DAHDI/2-1", "hangupcall,") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:1] GotoIf("DAHDI/2-1", "1?endmixmoncheck") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,9) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:9] NoOp("DAHDI/2-1", "End of MIXMON check") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:10] GotoIf("DAHDI/2-1", "1?nomeetmemon") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,15) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:15] NoOp("DAHDI/2-1", "MEETME_RECORDINGFILE=") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:16] GotoIf("DAHDI/2-1", "1?noautomon") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,18) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:18] NoOp("DAHDI/2-1", "TOUCH_MONITOR_OUTPUT=") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:19] GotoIf("DAHDI/2-1", "1?noautomon2") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,25) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:25] NoOp("DAHDI/2-1", "MONITOR_FILENAME=") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:26] GotoIf("DAHDI/2-1", "1?skiprg") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,29) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:29] GotoIf("DAHDI/2-1", "1?skipblkvm") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,32) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:32] GotoIf("DAHDI/2-1", "1?theend") in new stack [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Goto (macro-hangupcall,s,34) [Jan 5 08:57:48] VERBOSE[11939] pbx.c: -- Executing [s@macro-hangupcall:34] Hangup("DAHDI/2-1", "") in new stack [Jan 5 08:57:48] VERBOSE[11939] app_macro.c: == Spawn extension (macro-hangupcall, s, 34) exited non-zero on 'DAHDI/2-1' in macro 'hangupcall' [Jan 5 08:57:48] VERBOSE[11939] pbx.c: == Spawn extension (from-did-direct, h, 1) exited non-zero on 'DAHDI/2-1' [Jan 5 08:57:48] VERBOSE[11939] sig_analog.c: -- Hanging up on 'DAHDI/2-1' [Jan 5 08:57:48] VERBOSE[11939] chan_dahdi.c: -- Hungup 'DAHDI/2-1' [Jan 5 08:57:51] VERBOSE[12615] sig_analog.c: -- Starting simple switch on 'DAHDI/2-1' [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@from-pstn:1] Set("DAHDI/2-1", "__FROM_DID=s") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@from-pstn:2] Gosub("DAHDI/2-1", "app-blacklist-check,s,1") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@app-blacklist-check:1] GotoIf("DAHDI/2-1", "0?blacklisted") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@app-blacklist-check:2] Set("DAHDI/2-1", "CALLED_BLACKLIST=1") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@app-blacklist-check:3] Return("DAHDI/2-1", "") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@from-pstn:3] ExecIf("DAHDI/2-1", "1 ?Set(CALLERID(name)=)") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@from-pstn:4] Set("DAHDI/2-1", "__CALLINGPRES_SV=allowed_not_screened") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@from-pstn:5] Set("DAHDI/2-1", "CALLERPRES()=allowed_not_screened") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@from-pstn:6] Goto("DAHDI/2-1", "ivr-3,s,1") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Goto (ivr-3,s,1) [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:1] Set("DAHDI/2-1", "MSG=custom/ivr1111") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:2] Set("DAHDI/2-1", "LOOPCOUNT=0") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:3] Set("DAHDI/2-1", "__DIR-CONTEXT=") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:4] Set("DAHDI/2-1", "_IVR_CONTEXT_ivr-3=") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:5] Set("DAHDI/2-1", "_IVR_CONTEXT=ivr-3") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:6] GotoIf("DAHDI/2-1", "0?begin") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:7] Answer("DAHDI/2-1", "") in new stack [Jan 5 08:57:55] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:8] Wait("DAHDI/2-1", "1") in new stack [Jan 5 08:57:56] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:9] Set("DAHDI/2-1", "TIMEOUT(digit)=3") in new stack [Jan 5 08:57:56] VERBOSE[12615] func_timeout.c: -- Digit timeout set to 3.000 [Jan 5 08:57:56] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:10] Set("DAHDI/2-1", "TIMEOUT(response)=10") in new stack [Jan 5 08:57:56] VERBOSE[12615] func_timeout.c: -- Response timeout set to 10.000 [Jan 5 08:57:56] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:11] Set("DAHDI/2-1", "__IVR_RETVM=") in new stack [Jan 5 08:57:56] VERBOSE[12615] pbx.c: -- Executing [s@ivr-3:12] ExecIf("DAHDI/2-1", "1?Background(custom/ivr1111)") in new stack [Jan 5 08:57:56] VERBOSE[12615] file.c: -- <DAHDI/2-1> Playing 'custom/ivr1111.slin' (language 'en') [Jan 5 08:58:00] VERBOSE[12615] pbx.c: == CDR updated on DAHDI/2-1 [Jan 5 08:58:00] WARNING[12615] func_db.c: DB_DELETE requires an argument, DB_DELETE(<family>/<key>) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [1007@ivr-3:1] ExecIf("DAHDI/2-1", "0?Noop(Deleting: : )") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [1007@ivr-3:2] Set("DAHDI/2-1", "__NODEST=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [1007@ivr-3:3] Goto("DAHDI/2-1", "from-did-direct,1007,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (from-did-direct,1007,1) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [1007@from-did-direct:1] Macro("DAHDI/2-1", "exten-vm,novm,1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:1] Macro("DAHDI/2-1", "user-callerid,") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:1] Set("DAHDI/2-1", "AMPUSER=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:2] GotoIf("DAHDI/2-1", "0?report") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:3] ExecIf("DAHDI/2-1", "1?Set(REALCALLERIDNUM=)") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:4] Set("DAHDI/2-1", "AMPUSER=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:5] Set("DAHDI/2-1", "AMPUSERCIDNAME=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:6] GotoIf("DAHDI/2-1", "1?report") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-user-callerid,s,10) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:10] GotoIf("DAHDI/2-1", "0?continue") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:11] Set("DAHDI/2-1", "__TTL=64") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:12] GotoIf("DAHDI/2-1", "1?continue") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-user-callerid,s,19) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:19] Set("DAHDI/2-1", "CALLERID(number)=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:20] Set("DAHDI/2-1", "CALLERID(name)=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-user-callerid:21] NoOp("DAHDI/2-1", "Using CallerID "" <>") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:2] Set("DAHDI/2-1", "RingGroupMethod=none") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:3] Set("DAHDI/2-1", "VMBOX=novm") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:4] Set("DAHDI/2-1", "__EXTTOCALL=1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:5] Set("DAHDI/2-1", "CFUEXT=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:6] Set("DAHDI/2-1", "CFBEXT=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:7] Set("DAHDI/2-1", "RT=""") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:8] Macro("DAHDI/2-1", "record-enable,1007,IN") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-record-enable:1] GotoIf("DAHDI/2-1", "1?check") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-record-enable,s,4) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-record-enable:4] ExecIf("DAHDI/2-1", "0?MacroExit()") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-record-enable:5] GotoIf("DAHDI/2-1", "0?Group:OUT") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-record-enable,s,15) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-record-enable:15] GotoIf("DAHDI/2-1", "1?IN") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-record-enable,s,20) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-record-enable:20] ExecIf("DAHDI/2-1", "1?MacroExit()") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:9] Macro("DAHDI/2-1", "dial-one,"",tr,1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:1] Set("DAHDI/2-1", "DEXTEN=1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:2] Set("DAHDI/2-1", "DIALSTATUS_CW=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:3] GosubIf("DAHDI/2-1", "0?screen,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:4] GosubIf("DAHDI/2-1", "0?cf,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:5] GotoIf("DAHDI/2-1", "1?skip1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-dial-one,s,8) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:8] GotoIf("DAHDI/2-1", "0?nodial") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:9] GotoIf("DAHDI/2-1", "0?continue") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:10] Set("DAHDI/2-1", "EXTHASCW=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:11] GotoIf("DAHDI/2-1", "1?next1:cwinusebusy") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-dial-one,s,12) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:12] GotoIf("DAHDI/2-1", "0?docfu:skip3") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-dial-one,s,16) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:16] GotoIf("DAHDI/2-1", "1?next2:continue") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-dial-one,s,17) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:17] GotoIf("DAHDI/2-1", "1?continue") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-dial-one,s,25) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:25] GotoIf("DAHDI/2-1", "0?nodial") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:26] GosubIf("DAHDI/2-1", "1?dstring,1:dlocal,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:1] Set("DAHDI/2-1", "DSTRING=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:2] Set("DAHDI/2-1", "DEVICES=1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:3] ExecIf("DAHDI/2-1", "0?Return()") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:4] ExecIf("DAHDI/2-1", "0?Set(DEVICES=007)") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:5] Set("DAHDI/2-1", "LOOPCNT=1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:6] Set("DAHDI/2-1", "ITER=1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:7] Set("DAHDI/2-1", "THISDIAL=SIP/1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:8] GosubIf("DAHDI/2-1", "1?zap2dahdi,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:1] ExecIf("DAHDI/2-1", "0?Return()") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:2] Set("DAHDI/2-1", "NEWDIAL=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:3] Set("DAHDI/2-1", "LOOPCNT2=1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:4] Set("DAHDI/2-1", "ITER2=1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:5] Set("DAHDI/2-1", "THISPART2=SIP/1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:6] ExecIf("DAHDI/2-1", "0?Set(THISPART2=DAHDI/1007)") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:7] Set("DAHDI/2-1", "NEWDIAL=SIP/1007&") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:8] Set("DAHDI/2-1", "ITER2=2") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:9] GotoIf("DAHDI/2-1", "0?begin2") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:10] Set("DAHDI/2-1", "THISDIAL=SIP/1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [zap2dahdi@macro-dial-one:11] Return("DAHDI/2-1", "") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:9] Set("DAHDI/2-1", "DSTRING=SIP/1007&") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:10] Set("DAHDI/2-1", "ITER=2") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:11] GotoIf("DAHDI/2-1", "0?begin") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:12] Set("DAHDI/2-1", "DSTRING=SIP/1007") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [dstring@macro-dial-one:13] Return("DAHDI/2-1", "") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:27] GotoIf("DAHDI/2-1", "0?nodial") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:28] GotoIf("DAHDI/2-1", "1?skiptrace") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-dial-one,s,30) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:30] Set("DAHDI/2-1", "D_OPTIONS=tr") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:31] ExecIf("DAHDI/2-1", "0?SIPAddHeader(Alert-Info: )") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:32] ExecIf("DAHDI/2-1", "0?SIPAddHeader()") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:33] ExecIf("DAHDI/2-1", "0?Set(CHANNEL(musicclass)=)") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:34] GosubIf("DAHDI/2-1", "0?qwait,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:35] Set("DAHDI/2-1", "__CWIGNORE=") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:36] Set("DAHDI/2-1", "__KEEPCID=TRUE") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:37] Dial("DAHDI/2-1", "SIP/1007,"",tr") in new stack [Jan 5 08:58:00] VERBOSE[12615] netsock2.c: == Using SIP RTP TOS bits 184 [Jan 5 08:58:00] VERBOSE[12615] netsock2.c: == Using SIP RTP CoS mark 5 [Jan 5 08:58:00] VERBOSE[12615] app_dial.c: -- Called SIP/1007 [Jan 5 08:58:00] VERBOSE[3080] chan_sip.c: -- Got SIP response 480 "Temporarily not available" back from 109.224.55.134:1024 [Jan 5 08:58:00] VERBOSE[12615] app_dial.c: -- SIP/1007-000000bd is circuit-busy [Jan 5 08:58:00] VERBOSE[12615] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:38] ExecIf("DAHDI/2-1", "0?Set(DIALSTATUS=)") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:39] GosubIf("DAHDI/2-1", "0?s-CONGESTION,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-dial-one:40] MacroExit("DAHDI/2-1", "") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:10] GotoIf("DAHDI/2-1", "0?exit") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:11] Set("DAHDI/2-1", "SV_DIALSTATUS=CONGESTION") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:12] GosubIf("DAHDI/2-1", "0?docfu,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:13] GosubIf("DAHDI/2-1", "0?docfb,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:14] Set("DAHDI/2-1", "DIALSTATUS=CONGESTION") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:15] NoOp("DAHDI/2-1", "Voicemail is 'novm'") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s@macro-exten-vm:16] GotoIf("DAHDI/2-1", "1?s-CONGESTION,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Goto (macro-exten-vm,s-CONGESTION,1) [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s-CONGESTION@macro-exten-vm:1] NoOp("DAHDI/2-1", "IVR_RETVM: IVR_CONTEXT: ivr-3") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s-CONGESTION@macro-exten-vm:2] GotoIf("DAHDI/2-1", "0?exit,1") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s-CONGESTION@macro-exten-vm:3] PlayTones("DAHDI/2-1", "congestion") in new stack [Jan 5 08:58:00] VERBOSE[12615] pbx.c: -- Executing [s-CONGESTION@macro-exten-vm:4] Congestion("DAHDI/2-1", "10") in new stackآخرین ویرایش توسط yari67; در تاریخ/ساعت 01-05-2014, 10:07 AM.یک نظر بدهید:
-
سلام
لطفا با داخلی که این اتفاق براش میفته تماس بگیرین و لاگ استریسک رو هم همزمان بگیرین و توی این پست بزارین . این اتفاق هم میتونه از کم اوردن سیستم باشه یک بار سرور الستیکس رو ریست کنید ببینید مشکل رفع میشه.یک نظر بدهید:
-
یکطرفه شدن برخی از داخلی ها
سلام
بعضی از داخلی ها بعد از مدتی به یکباره یکطرفه می شند و از این طرف نمی شه باهاشون تماس گرفت، یکبار بوق می خوره و بعد قطع می شه می خواستم بدونم چرا این مشکل بوجود می یاد و راه حلش چیه؟
من داخلی هایی که اینطوری هستند رو یکبار حدف و دوباره ایجاد کردم ولی تأثیری نداشت
یک نظر بدهید: