سلام. ببخشید استادم یه پروژه داده یه جاهاییشو درس داده ولی یه جاهایی رو درس نداده و گفته خودمون پیدا کنیم! من یه شبکه طبق عکس طراحی کردم روتر سمت چپ کامل هست ولی وقتی می خواهم از طریق کامپیوتر ها به سرور گوگل وصل بشم ارور میده و نمیدونم اون سرور رو چجوری کانفیگ کنم! آی پی دادم ولی بلد نیستم چجوری دامنه بدم و بشه با کامپیوتر های سمت چپ بازش کرد! از پیکربندی pat هم در روتر سمت چپ استفاده کردم!!!!
لطفاً اگر امکانش هست راهنماییم کنین که از چه دستوراتی باید استفاده بکنم!
این مال روتر Eslamzadeh هستش!!!
این مال روتر Eslamzadeh هستش!!!
کد:
کد:
Building configuration... Current configuration : 1460 bytes ! version 12.2 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption ! hostname Eslamzadeh ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface FastEthernet0/0 ip address 192.168.2.1 255.255.255.0 ip nat inside duplex auto speed auto ! interface FastEthernet1/0 ip address 192.168.3.1 255.255.255.0 ip nat inside duplex auto speed auto ! interface Serial2/0 no ip address shutdown ! interface Serial3/0 no ip address shutdown ! interface FastEthernet4/0 no ip address shutdown ! interface FastEthernet5/0 no ip address shutdown ! interface FastEthernet6/0 ip address 192.168.4.1 255.255.255.0 ip nat inside duplex auto speed auto ! interface GigabitEthernet7/0 ip address 192.168.1.1 255.255.255.0 ip nat outside duplex auto speed auto ! router ospf 10 log-adjacency-changes network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 network 192.168.3.0 0.0.0.255 area 0 network 192.168.4.0 0.0.0.255 area 0 ! router rip ! ip nat pool Eslamzadeh 192.168.1.1 192.168.1.1 netmask 255.255.255.0 ip nat inside source list 1 pool Eslamzadeh overload ip nat inside source list 2 pool Eslamzadeh overload ip nat inside source list 3 pool Eslamzadeh overload ip classless ! ! access-list 1 permit 192.168.2.0 0.0.0.255 access-list 2 permit 192.168.3.0 0.0.0.255 access-list 3 permit 192.168.4.0 0.0.0.255 ! ! ! ! ! line con 0 ! line aux 0 ! line vty 0 4 login ! ! ! end [RIGHT][COLOR=#333333][/COLOR][/RIGHT]
اینم مال روتر Google
کد:
کد:
Building configuration... Current configuration : 791 bytes ! version 15.1 no service timestamps log datetime msec no service timestamps debug datetime msec no service password-encryption ! hostname Google ! ! ! ! ! ! ! ! ! ! ! ! license udi pid CISCO2911/K9 sn FTX1524E046 ! ! ! ! ! spanning-tree mode pvst ! ! ! ! interface GigabitEthernet0/0 ip address 199.1.1.1 255.255.255.0 duplex auto speed auto ipv6 ospf cost 1 ! interface GigabitEthernet0/1 ip address 199.1.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 no ip address duplex auto speed auto shutdown ! interface Vlan1 no ip address shutdown ! router ospf 10 log-adjacency-changes network 199.1.1.0 0.0.0.255 area 0 network 199.1.2.0 0.0.0.255 area 0 ! ip classless ! ! ! no cdp run ! ! ! ! ! line con 0 ! line aux 0 ! line vty 0 4 login ! ! ! end [RIGHT][COLOR=#333333][/COLOR][/RIGHT]
از پروتکل ospf هم استفاده کردم ولی روتر ها همو نمی بینند!!!!
کامنت